Front Seat Track Motor Repair for Town Car V8-46L VIN V Flex Fuel
7. NOTE:
-
If not correctly positioned, the seat track motor assembly cannot be removed from the seat track.
-
If the seat track does not move, manually turn the drive tube while applying power to the horizontal motor.
Position the seat track horizontally by applying power and ground to the seat track motor pins. Position the outboard track most of the way forward
so that 2 teeth are showing next to the outboard retainer clip and a flat spot on the drive tube is positioned upward.
8. NOTE: This step is critical so that during installation the inboard and outboard tracks can be checked to make sure they are in alignment with
each other.
Mark the position of the outboard track C-channel to the plastic-coated slide as shown.
9. NOTE: This step is critical so that during installation the inboard and outboard tracks can be checked to make sure they are in alignment with
each other.
