Town Car V8-4.6L VIN V Flex Fuel (2006)
8. Detach the adjustable brake pedal drive cable from the brake pedal assembly.
9. Disconnect the stoplight switch harness from the pedal bracket.
10. Remove the pinch bolt and disconnect the lower steering column shaft from the steering column lower yoke.
^
Discard the bolt.
^
To install, tighten to 28 Nm (21 ft. lbs.).
11. Remove the 4 brake pedal bracket nuts and the brake pedal bracket.
^
To install, tighten to 28 Nm (21 ft. lbs.).
12. CAUTION: The adjustable pedal system must be indexed whenever the brake pedal assembly or the accelerator pedal assembly is repaired. For
additional information, refer to Adjustable Pedal Indexing - Brake.
CAUTION: The brake switch must be positioned with the closed hole away from the brake pedal arm and the open hole toward the brake pedal
arm.
To install, reverse the removal procedure.
^
Verify correct stoplight operation.
