lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Module Communications Network|Page 3503 > < Module Communications Network|Page 3501
Page 20
background image

K1-K3

Normal Operation

The RCM communicates with the diagnostic tool through the standard corporate protocol (SCP) communications network, circuits 914 (TN/OG) and
915 (PK/LB). Check the SCP circuits between the RCM C310a and the data link connector (DLC) C251. The total resistance values must not be more
than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the SCP network, damage to the DLC C251, or damage to the RCM
C310a.

Possible Causes

-

ISO 9141 circuit 70 (LB/WH) open

-

RCM C310a

-

RCM

Test L: The Parking Aid Module Does Not Respond To The Diagnostic Tool

PINPOINT TEST L: THE PARKING AID MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

Module Communications Network|Page 3503 > < Module Communications Network|Page 3501