lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Manual Control Lever Shaft and Seal|Page 4973 > < Manual Control Lever Shaft and Seal|Page 4971
Page 8
background image

21. Remove the rear extension housing bolts and the housing.

22. Remove the extension housing gasket.

Installation 

1. Install a new extension housing gasket.

2. Install the extension housing and the bolts.

^

Tighten to 28 Nm (21 ft. lbs.). 

Manual Control Lever Shaft and Seal|Page 4973 > < Manual Control Lever Shaft and Seal|Page 4971