Town Car V8-4.6L VIN V Flex Fuel (2006)
10. Install the windshield glass aligning it to the marks made previously.
11. CAUTION: When installing urethane-installed glass parts, the vehicle must not be driven until the urethane has cured. Adequate cure
time is specified on the drive away chart for each urethane product as the temperatures and humidity vary. Inadequate or incorrect
curing can adversely affect the retention of the windshield glass.
NOTE: The urethane adhesive must cure for a minimum of 1 hour before testing for air or water leaks.
After the urethane cures, check the windshield glass seal for air or water leaks through the urethane adhesive bead and add urethane adhesive as
necessary.
12. Position the front portion of the headliner.
13. Install the sun visors and sun visor clips.
14. Install the LH and RH A-pillar trim panels.
15. Install the front door weatherstrips.
16. Install the instrument panel defroster opening grille.
-
Connect the electrical connectors.
17. Install the interior rear view mirror.
18. Install the cowl panel grille.
