Zephyr V6-3.0L VIN 1 (2006)
^
Stage 2: Tighten to 20 Nm (15 ft. lbs.).
7. Install the shield bracket and the 2 RH catalytic converter manifold shield bracket bolts.
^
Tighten to 20 Nm (15 ft. lbs.).
8. Tighten the 2 RH catalytic converter manifold bracket bolts.
^
Tighten to 20 Nm (15 ft. lbs.).
9. Position the RH catalytic converter manifold shield and install the 2 bolts.
^
Tighten to 10 Nm (89 inch lbs.).
10. Connect the H02S and CMS electrical connectors.
11. Install the EGR tube. For additional information, refer to Emission Control Systems.
12. Install the exhaust flexible pipe.
13. If equipped, install the 7 screws and the underbody cover.