Protege L4-1839cc 1.8L DOHC (1990)
Brake Caliper: Service and Repair
Removal/Installation
Front
1.
Raise and support front of vehicle.
2.
Remove tire and wheel assemblies.
3.
Remove pad pins, springs, brake pads and shims.
4.
Disconnect and cap brake line.
5.
Remove caliper attaching bolts, then the caliper assembly.
6.
Reverse procedure to install.
Rear
1.
Raise and support rear of vehicle.
2.
Remove tire and wheel assemblies.
3.
Disconnect and cap brake line.
4.
Remove caliper guide pin bolts.
5.
Remove caliper assembly from vehicle.
6.
Reverse procedure to install.