190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
5
Slide housing of inside door actuation forward and release inside out of inside door panel and linkage on door handle.
6
Pull door lining out of holders in upward direction and remove.
Installation
8
Introduce door lining from above into sealing strip and locking button, while simultaneously entering with hook into inside door panel.
9
For further installation proceed vice versa.
Note: If sealing sheet on inside door panel is damaged, renew prior to installing door lining.
The screw at top of handle is micro-encapsulated and should either be replaced or screwed-in with a screw locking compound.