190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
25
Insert solenoid coil (9) into pulley (7).
26
Push clutch body (3) into pulley (7) and screw on provisionally using new locks and bolts (8). Coat threads of bolts with Loctite.
27
Place complete assembly group on front housing cover. Before pressing on assembly group completely, ensure that the terminals of the solenoid
coil are correctly positioned in relation to the refrigerant compressor and that the three projections on the back of the solenoid coil are in alignment
with the three recesses in the housing cover.
28
Insert locking ring (5) for assembly group.