190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
Magnetic clutch (71)
Remove, install by opening or closing the plug housing on the refrigerant compressor.
Special tool
Removing and installing spring plate
Removing
1
Remove fan and fan hood.
2
Release and remove ribbed V-belt.
3
Hold spring plate in place using pin wrench and slacken bolt.
4
Remove spring plate.
Installing
5
Push spring plate onto compressor shaft and tighten nut to 16 ± 1.0 Nm.
6
Check gap using valve gauge and correct if necessary with shims.
7
Fit ribbed V-belt and tension.
8
Install fan hood and fan.
9
Check function of air conditioning system See: Testing and Inspection
Removing and installing V-belt pulley
Removing