190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
A ............................................................................................................................................................................................................. Control valve body
B .................................................................................................................................................................................................................. Pickup housing
1 ..................................................................................................................................................................................................................... Selector valve
13 .............................................................................................................................................................................................................. Plate check valve
24 .................................................................................................................. Primary pump check valve (not featured after omission of secondary pump)
33a ............................................................................................................................................................................................ B2 shift valve swarf strainer
46 ............................................................................................................................................................................... Control pressure control valve piston
86 ......................................................................................................................................................................................................... LB 3 drainage valve
1. Unscrew slotted-head screws (arrows).
Note:
Pay attention to plate check valve (13).
2. Hold control valve body (A) and pickup housing (B) together and turn over