190D 2.5 (201.126) L5-2.5L DSL (602.911) (1987)
Layout With Single-pipe Exhaust System
Layout With Double-pipe Exhaust System
6 Loosen propeller shaft clamping nut for approx. two turns without sliding back rubber sleeve (sliding along). Tightening torque 30 - 40 Nm, while
paying attention to correct seat of rubber sleeve.
7 Remove front propeller shaft from transmission.
Note: Flexible coupling remains on propeller shaft.
Installation note: Renew self-locking hex. nuts, tightening torque 45 Nm.