190E 2.3 (201.024) L4-2.3L (102.961) (1984)
/l4-2.3l_(102.961)/Page-2058002.png)
9 Unscrew tube mounting clamps from rear pillar.
10 Push tube backwards into the trunk until it can be pulled out of the sliding roof frame.
11 Pull tube forward into the vehicle interior and remove.
Installation:
12 Install new tube by first introducing the tube from the vehicle interior into the trunk and then into the sliding roof frame.
CAUTION: Do not bend tube during installation to avoid that the cable gets stuck.
13 Install holder with motor and gearing.
14 Attach tube to sliding roof frame and rear pillar.
15 Further installation takes place in reverse order.
