190E 2.3 (201.024) L4-2.3L (102.961) (1984)
/l4-2.3l_(102.961)/Page-2079002.png)
3 Loosen hex nut on mounting bracket of stop rod left and right and adjust sliding roof cover in longitudinal direction in such a manner that the sliding
roof has a perfect seal at the front edge.
4 With the sliding roof opened by half, loosen screw on stop rod inside left and right and adjust in such a manner that the sliding roof can be locked in
any position and the closing lever operated applying normal effort. At the same time, make sure that the sliding roof is located in center of cutout.
Adjusting Front Height
