190E 2.3 (201.028) L4-2.3L (102.985) (1987)
Parking Brake Cable: Service and Repair
Front Cable
Removal and installation of front brake control cable
Preceding work:
Remove center console
Remove, install exhaust heat shield.
-
Unhook return spring (94) on cable swivel (92).
-
Screw out bolts (93), remove brake control cable (85).
-
Remove collar pin (8) and remove brake cable (85) together with grommet (16). When installing assure that collar pin (8) is secure carefully with
cotter pin.
-
Adjust parking brake affer repair. See: Adjustments