190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Procedure: Metal Dust Removal
Caution!
M-B Metal Dust Remover contains oxalic and phosphoric acid. Observe all safety rules and regulations relating to HAZARDOUS MATERIALS.
Wear acid-proof impermeable safety clothing (apron and gloves) and goggles.
1.
Wash vehicle.
2.
Apply undiluted M-B Metal Dust Recover with a towel or soft bristled brush, exerting a slight pressure. Let the liquid react with the surface for a
maximum of ten (10) minutes. Do not allow the liquid to dry.
3.
If surface does not come clean after the first attempt, repeat cleaning process. Do not lengthen the reaction time as this may damage the surface of
the paintwork or plastic components.
4.
Rinse the vehicle with generous amounts of water, wash with M-B Autoshampoo and dry.
5.
Polish treated areas with M-B Paint Polish and a polishing cloth.
Note:
Depending upon the condition of the paint surface, first use a buffing machine and M-B Fine Polishing Paste.
6.
Apply M-B Paint Protector and Sealer to protect the paintwork against environmental influences.
Parts Information