260E (124.026) L6-2.6L (103.940) (1988)
Slacken screw (1).
Unscrew guide tube (2) unscrew, screw in new guide tube (2) and align.
Attach ground cable at new guide tube (2).
Stick ground contact sheet (3) onto inside of fender.
Note: As of 04.92 on model 124.036 an automatic antenna (M11) with improved (capacitive) ground has been installed.
If radio interference exists in VHF range (with the exception of ignition and alternator interference), install guide tube with improved ground.
G. General
Model 124.034/036
As of 04.92 an automatic antenna with improved (capacitive) ground has been installed.
3 Ground contact foil
M11
Automatic antenna
Antenna as of approx. 07/93
The electronic stage was separated from the mechanical stage of the antenna and aattached to the mechanical section of the antenna in a separate
housing.
M11
Automatiache Antenne
Japan version