260E (124.026) L6-2.6L (103.940) (1988)
Rear Door Latch: Service and Repair
Removal and installation of door lock on rear door
Removal
1 Remove door handle outside complete with bearing bracket. See: Front Door/Front Door Handle/Front Door Exterior Handle/Service and Repair
2 Remove door inside actuation with locking linkage. See: Front Door/Front Door Handle/Front Door Interior Handle/Service and Repair
3 Unscrew screws on door lock.
4 Remove door lock on upper door opening.
Installation
5 Insert door lock.
6 First tighten the two fastening screws on face side, then those on door inside panel to 8 Nm.
7 For further installation proceed vice versa.