260E (124.026) L6-2.6L (103.940) (1988)
Sunroof / Moonroof Cable: Service and Repair
Removal:
1 Remove tilting/sliding sun roof headlining. See: Sunroof / Moonroof Interior Trim Panel/Service and Repair
2 Unscrew guide plate on sliding carrier and disengage.
3 Push actuating switch to "Lift roof" and let control cable run out of gear unit.
4 Pull out control cable in forward direction.
NOTE: If the control cable cannot be moved with electric drive, use emergency crank.
5 If the control cable cannot be pulled out, disassemble gear unit of electric drive See: Sunroof / Moonroof Motor/Service and Repair
6 If upon disassembly of gear unit the control cable can still not be removed, it has been distorted in the tube, which should then be removed See:
Sunroof / Moonroof Cable Housing/Service and Repair
Installation: