260E (124.026) L6-2.6L (103.940) (1988)
2.
Fasten rpm sensor and protective plate with hex screw to steering knuckle. Tightening torque to 72 in-lbs (8 N-m). Note: The self-locking hex
socket screw may be used only once.
3.
Clip cable to cover plate.
4.
Fasten rpm sensor with new self-locking hex socket screws to steering knuckle. See "SPECIFICATIONS" for torque specifications.
5.
Clip cable to holder and pull through rubber grommet into engine compartment.
6.
Replace O-ring. Connect coaxial plug.
7.
Mount front wheel.
8.
Complete tests.