260E (124.026) L6-2.6L (103.940) (1988)
/l6-2.6l_(103.940)/Page-825003.png)
Using Counter-Holder Between Fan Bearing Bracket And Belt Pulley
8. Remove retaining screw (201) and pull the fan (206) forward and out.
Removing The Viscous Fan Clutch Assembly
INSTALLATION:
1. Place the fan onto the belt pulley. Insert the retaining nut and torque to 45 Nm (33 ft.lbs).
2. Place the fan cowling back on the radiator and secure the flat springs.
3. Place the coolant hose back into the plastic holder on top of the fan shroud.
4. Install the distributor.
5. Install the fan shroud and secure the catches on both sides.
6. Connect the negative battery cable.
