300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
Shock absorber without separating piston F & S
75
Shock absorber
75a
Hex. nuts
75b
Washer
75c
Upper rubber ring
75d
Lower rubber ring
75f
Dust protection
On F & S shock absorbers without separating piston, starting production 1975, an additional lower disc must be inserted on upper
suspension, while the former version did not require a lower disc.
6. Install shock absorber and mount upper suspenslon, making sure that the parts are correctly seated. Tighten the lower of the two hex nuts up to end
of threads, then counterlock with upper nut.
Note:
The dust protection (75f) is required only on vehicles with poor road conditions.
1st version
Upper suspension
Shock absorber without separating piston