300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
Model 126.120
1
Nut M 12 x 1.5
2
Spring washer
4
Engine mount
12
Engine carrier
16
washer 10.5
17
Combination screw M 10 x 22
13
Washer
14
Combination screw M 8 x 15
15
Nut holder
4
On model 123.193 standard version up to July 1981, unscrew adjusting screw (11 and take engine mount (4) out of holder.
Installation
5
On model 123.193 standard version up to July 1981, place new engine mount into holder (8).
6
Place new engine mount with or without holder (depending on model) on engine carrier (12).
7
On model 123.193 screw-in adjusting screw (11) (do not tighten).
8
Lower transmission.
9
Position screws (14) and tighten to 30 Nm.
10
Screw-on nut (1). Torque reference value 70 Nm.
11
On model 123.193, adjust engine stop.