300CE (124.050) L6-3.0L (103.983) (1989)
-
With steering gear removed, unscrew P-valve (Y10). Absolute cleanliness is required.
-
Replace the seal (Y10/1).
-
Torque to 70 Nm on installation.
Remove, Install & Check Bearing Cover w/ Pitman Arm Shaft
Steering Gear with Adjusting Screw at Top
Removing, Installing and Checking Bearing Cover with Pitman Arm Shaft:
1 Steering Gear
12 Pitman Arm
16 Locking Ring
43 Piman Arm Shaft