300D (123.133) L5-3.0L DSL Turbo (617.952) (1984)
/l5-3.0l_dsl_turbo_(617.952)/Page-293005.png)
Model 126.120
On model 126.120, pull longitudinal regulating shaft out of guide lever in rearward direction and remove in forward direction.
On models 123 with automatic transmission 722.303 (W4A 040) and 126.120, pull out central plug for vacuum lines (71) or vacuum lines.
Disconnect bowden wire, compress black plastic clip (arrow) and pull bowden wire out of holder in rearward direction.
12
Set engine to TDC of 1st cylinder. For this purpose, screw bolt M 18 x 1.5 x 45 with cup washers into crankshaft.
Rotate engine with tool combination at crankshaft.
Attention! Rotate crankshaft only in direction of rotation of engine.
