1986 Mercedes-Benz 300E (124030) Head Restraint Adjusting Rail Removal and Installation
-
S 52 Switch for unlocking headrest
24. Install lacing of auxiliary harness via center console to switch holding grille and fasten with cable straps.
-
S 52 Switch for unlocking headrests
25. Fasten connector of auxiliary harness in switch holding grille with clips, plugs on switch and put switch holding grille back again.
-
S Switch for unlocking headrest
26. Mill cutout for switch into cover or use new cover with switch cutout. Then reinstall cover.
-
8 Vacuum line
-
9 Cable strap
-
Valve for unlocking headrests with cutout delay
27. Connect vacuum line 980 mm long with connecting piece to valve and install in trunk.