300E (124.030) L6-3.0L (103.983) (1986)
5.
Fasten latch plate and spacer (part no. 100 991 04 40) to existing anchorage with mounting screw.
Model 123.193
Figure 3 - Anchorage Point Locations in Model 123.193
Right or middle location:
1.
Locate existing anchorage point according to dimensions in Figure 3 and punch a 12 mm diameter hole in the rear seat back liner.
2.
Fasten latch plate with mounting screw.
Figure 4 - Seat Belt Anchorage Point in Model 123.193
Left location:
1.
Loosen left wheel housing cover.
2.
Remove seat belt link (5) from its anchorage point (Figure 4).
3.
Enlarge hole in latch plate to 12 mm and fasten under the seat belt link.
Model 124.030/133, 126 and 201 (except Model 201 as of Model Year 1986 Middle Location)