300E (124.030) L6-3.0L (103.983) (1986)
35. Insert vanes (7a, 10 vanes) in the rotor (7). Insert vanes with the rounded. metallic glossy sides towards the cam insert in the rotor.
36. Insert straight pins (6a) with the punched end (arrow) in the bores of the cam insert (6) so that they project on both sides of the cam insert.
37. Insert cam insert (6) with direction of rotation arrow upwards on the bearing flange (4). At the same time the straight Pins (6a) must be above the
centering bores (arrow).
38. Insert seal (8a) and shaped wedge (8b) in pressure plate (8).
Mount pressure plate (8) with the ground surface towards the cam insert.
Insert O-ring (4h) in bearing flange (A).