300SD (126.120) L5-3.0L DSL Turbo (617.951) (1982)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
REMOVING, INSTALLING AND TESTING TEMPERATURE SWITCH FOR COLD ENGINE LOCK
up to 08/85
Temperature switch:
Up to 11/82
-
Cut-in point: 33 ±3 °C
-
Cut-out point: 20 ±3 °C
As of 12/82
-
Cut-in point: 37 ±3 °C
-
Cut-out point: 21 ±3 °C
Tightening Torque:
Width between flats 19
-
15 ±3 Nm
Removal:
1. Open radiator cap.
2. Pull single-point coupling from switch (2) and unscrew switch.
2
Temperature switch (cold engine lock) engine 116/117
Installation:
3. For installation proceed vice versa.