300SD (126.120) L5-3.0L DSL Turbo (617.951) (1982)
14 Fill caught oil through filling funnel (60) into fluid reservoir (2) in the engine compartment.
Attention! Reuse only clean oil.
15 Fill pressure oil system. Run engine at medium speed while setting lever of level controller for 30 seconds in position "F" (filling).
16 Mount connecting rod for level controller.
17 Check oil level in fluid reservoir (2) with engine stopped and correct, if required. In operational system and ready-for-driving condition the oil
level should be between the marks "max." (a) and "min." (b). On loaded vehicle, an oil level at "min." mark will result.