300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
Fig. 4 Rear Engine Mount Alignment
FRONT
1. Disable airbag system as outlined under Air Bags (Supplemental Restraint Systems), Service Precautions. Also refer to Service and Repair,
Arming and Disarming.
2. Refer to Fig. 1, for engine mount replacement procedure.
REAR
1. Disable airbag system as outlined under Air Bags (Supplemental Restraint Systems), Service Precautions. Also refer to Service and Repair,
Arming and Disarming.
2. Refer to Fig. 2, for engine mount replacement procedure.
3. Remove crossmember.
4. Remove mounting bolt, Fig. 3.
5. Reverse procedure to install, ensuring installation position is fixed by aligning notch in engine mount with notch in holder, Fig. 4.