300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
/l6-3.5l_dsl_turbo_(603.971)/Page-1397001.png)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Outside Temperature Sensor
Vacuum lines on element for main air flap (44)
Pull off.
Slacken 6 screws (3)
Raise air collector (2).
Outside temperature sensor B10/5
Pull out.
Open cable duct
Disconnect plug connector B10/5x1, check temperature sensor and renew if necessary.
Install
In reverse sequence.
NOTE: After completing the work erase fault memory in the control unit.