300SD (140.134) L6-3.5L DSL Turbo (603.971) (1993)
Output Shaft: Adjustments
Check and adjust axial play of connecting flange
1. Check axial play between connecting flange (33) and rear axle side gear (17). If necessary install thinner or thicker C-spacer (30a)
Axial play between connecting flange and differential housing ......................................................................................................................0.03-0.3 mm
Note:
End play must be within specified tolerance range.
Circlips are available in thicknesses ranging between 2.6 mm and 3.4 mm in graduations of 0.05 mm.