300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
2. Pull out element on switching rod clip (arrow) as far as stop.
3. Push switching rod into clip of element (arrow) and close clip.
4. Center element (19) by placing fastening bolts (arrows) into center of oblong holes for this purpose and tighten.
B. 2nd version starting approx. 03/83
Removal
1 Remove door lining. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2 With crank window closed, slip sliding sleeve (arrow) in downward direction, pulling off hose from element for this purpose and tightly
closing connection of element.