300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
Sunroof / Moonroof Interior Trim Panel: Service and Repair
Removal
1 With sliding roof opened by 3/4, unclip sliding roof headlining at the front (4 clips).
2 Completely open sliding roof.
3 Pull out sliding roof headlining in forward and upward direction.
4 Check upper halves of clips on sliding roof headlining.
5 Check lower halves of clips on sliding roof.
Installation
6 Close sliding roof and set both sliders to a horizontal position.
7 Completely open sliding roof.
8 Slip in sliding roof headlining from front top until the clips are knocking against sliding roof, while introducing tubing into protective tube on sliding
roof headlining.
9 Close sliding roof by half and audibly fasten sliding roof headlining at the front by means of clips (4 each).
10 Close sliding roof, lift approximately by half at the rear and in this position check whether the lateral screening can be perfectly pulled out and in.