mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
Reference Resistor|Page 3486 > < Diagram Information and Instructions|Page 3481

300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)

Page 1
background image

Idle Calibration Resistor: Testing and Inspection
Reference Resistor

1.

With engine off, disconnect the reference resistor.

2.

Check the voltage between terminals 1 and 2 of the reference resistor connector.  If voltage reading is 5 volts, replace the reference resistor.  If
reading is not 5 volts, check for and repair open circuit.

Reference Resistor|Page 3486 > < Diagram Information and Instructions|Page 3481