300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
8. Unscrew and remove voltage converter.
9. Disconnect plug from voltage converter.
Installation:
10. Connect plug to voltage converter.
11. Install voltage converter securely (arrowed).
12. Check system with tester, See: Testing and Inspection/Component Tests and General Diagnostics
13. Install side cladding on front bulkhead pillar with clips.
14. Continue installation in reverse order of removal.
15. Check system with RS/SRS control lamp (A1e15).
Type 2
Removal: