300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
Note: Tightening torque of hexagon nuts 140 Nm. Torque wrench 001 589 67 21 00. Raise or lower coupled semi-trailing arm until the rear axle
shafts are horizontal and then tighten up.
Replacing rubber bearing
6. Pull out rubber bearing out of the coupled semi-trailing arm with remover and installer 116 589 13 43 00.
Note: Coat rubber bearing with lubricant e.g. naphthalene. Pull in rubber bearing from outside inwards up to stop on eye of coupled semi-trailing
arm with puller and installer 116 589 13 43 00.
7. Installation takes place in the reverse sequence.