300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
17.
Pull taper roller bearing inner ring off rear axle shaft flange with puller 001 589 36 33 00 and collet 00 589 02 34 00.
Note: Press taper roller bearing inner ring (76) onto rear axle shaft flange (78) with a suitable tube.
Only use taper roller bearing with a large filet radius on the rear axle shaft flange (arrow).
If required, refinish oil return spiral with emery cloth (grain 180) at an angle of approx. 20~ over a length of 25 mm.