300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
Tighten hex. socket screws (45) and nut for axial holder (44) to 8 Nm. The slot (arrow) in axial holder (43) must be horizontal.Install intermediate
plate (21) and O-ring (22).
Disassembly And Assembly
1
Take pump wheels (22) and (23) from pump housing (20).
Installation Note
Lubricate pump wheels (22) and (23) and insert into pump housing (20). Rotate driving pump wheel (22) in such a manner that the drivers are entering
into grooves (arrow).
2
Remove locking ring (28) and cover (27).