300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
Shift Linkage: Adjustments
NOTE: For the adjusting jobs described below, the vehicle should rest on its wheels.
1
Disconnect control rod (5) from selector lever (2).
2
Set range selector lever (6) into position "N".
3
Loosen counter nut (4). Adjust control rod length wise in such a manner that approx. 1 mm clearance is available between selector lever (1) and
"N" stop on gear change plate.
4
Attach control rod and secure. Tighten counter nut (4).