300SDL (126.125) L6-3.0L DSL Turbo (603.961) (1987)
Wheel Bearing: Service and Repair
Removal and Installation
1.
Unscrew, screw in hexagon bolt for attaching rear axle shaft to rear axle shaft flange and remove together with spacing sleeve and tensioning
washer.
Note
Tightening torque 30 Nm (79).
Torque wrench 001 589 66 21 00.
Renew tensioning washer (79a) after one-time use. Oil tensioning washer (79a) in area of bolt head.
2.
Remove rear axle shaft.