300SE (140.032) L6-3.2L (104.990) (1992)
Front Door Exterior Handle: Service and Repair
Replacement of Exterior Door Handle on Driver's Door
Cover (1)
press off.
Screw (2)
screw out and remove.
Door handle (3)
press toward front and remove. Observe installation note!
Door handle (3)
install with base (4) so that rotating rod from lock cylinder (5) and actuating lever on handle (6) engages in door lock.
Screw (2)
screw in (6 Nm).
Cover (1)
install.
Door sealing frame
pull out of channel in area of door lock.
Clearance between door lock and door handle
adjust, arrest door lock with special tool and turn adjustment screw to outside until resistance is felt. Use Phillips screwdriver.
Door sealing frame
install.
Function
check.
Installation note
Adjust position of door handle on door panelling with screw (7) (Allen wrench, WAF 3 mm 1.5 Nm).
Special tools
Removal, Installation