300SEL (126.025) L6-3.0L (103.981) (1988)
/l6-3.0l_(103.981)/Page-2455005.png)
21
Slowly wrap cutting wire (17) onto coil of windlass (16) and cut out window up to marking (D).
22
Move windlass (16) to next position.
23
Slowly wrap cutting wire (17) onto coil of windlass (16) and cut out window up to marking (E).
24
Move windlass (15) to next position.
25
Slowly wrap cutting wire (17) onto coil of windlass (15) and cut out window up to marking (E).
Secure window against falling down to prevent damage.
26
Remove windlasses (15, 16) from window.
27
Fasten cup suction tool at outside of window and remove window from body flange.
Cup suction tool
Aid of helper required.
