300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-2711011.png)
Steps 1 through 25, See: Part 1 - Inside of Seat
26
Disconnect connector S52/1x1 and expose wire to microswitch S52/1.
27
Unscrew bracket and remove flexible drive shaft for backrest adjusting gear.
28
Unscrew screws on backrest adjusting gear inside and outside.
Observe installation note.
Tightening torque: 35 Nm.
