300SL (129.061) L6-3.0L (104.981) (1991)
/l6-3.0l_(104.981)/Page-612006.png)
Figure 13 And 14
Due to further technical development, camshafts with differing axial positioning have been used.
Installation position of the thrust washers:
1.
180° axial positioning, front, bottom, at bearing points 1 and 8 with 1 800 thrust washer (2a) on the bottom (Figure 13), (also Figure 16, item A).
2.
360° axial positioning, front, at bearing points 1 and 8 and one 1800 thrust washer at the top and at the bottom (2a and 2b, Figure 14), (also Figure
16, item A).
