300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
/l5-3.0l_dsl_turbo_(617.952)/Page-293004.png)
5
Press-in new connecting rod bushing in such a manner that the oil bores are in alignment.
Pressing-in pressure 2500 N.
6
Machine or ream connecting rod bushing.
7
Refinish lateral contact surfaces of connecting rod on a face plate.
Squaring
8
Square connecting rod by means of connecting rod tester.
9
Align connecting rod bearing bore in relation to connecting rod bushing bore (parallel alignment).
