300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
9
Rotate crankshaft with tool combination until the recess in balancing disk is in front of lower fastening screw of coolant pump housing (arrow).
10
Unscrew vent line on coolant pump housing (arrow).
11
Unscrew coolant pump housing and remove together with coolant pump.
Installation
12
Install coolant pump housing with new gasket and tighten fastening screws to 27 - 33 Nm.
13
For further installation proceed vice versa to removal.
14
Add coolant. See: Cooling System/Service and Repair