300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
FIGURE 7
York Refrigerant Compressor
1.
Always install a suction strainer (Figure 7) into suction port (Figure 8) during repair and replacement of this type of compressor.
2.
Strainers are available as separate spare parts.
3.
A strainer is included in the valve plate/head gasket kit and with a new compressor.
4.
With a new compressor also replace the receiver-dryer.
5.
Always replace the expansion valve, if compressor had broken internal parts. Do not replace expansion valve if compressor is replaced for other
reasons.
FIGURE 8
6.
Refrigerant lines connected to compressor may be reused if suction strainer is installed and lines are flushed clean (Figure 8).
Parts Information for York Compressor
Part Name
Part Number
York compressor with strainer (no clutch)
002 131 43 01
Valve plate with gaskets and strainer
000 586 34 13
Strainer only
000 131 04 34