300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
Upper suspension of spring strut (2nd version starting September 1982)
2
Frame cross member
5
Spring strut
5c
Upper rubber mount
5d
Lower rubber mount
5i
Disc
5q
Screw connection
B3
Pressure line (pressure hose) pressure reservoir - spring strut
Test instructions for lower suspension
The ball pin of bail joint should be movable back and forth without play, but also without binding and without creaking noises; take care that the
releasing torque is higher than the torque required for moving back and forth, In case of a defective sleeve, the ball joint must be renewed.
Attention!
Do not attach spring strut at piston rod.
Lower suspension of spring strut
5f
Dust guard
5p
Ball joint
5s
Disc
5t
Piston rod
19
Semi-trailing arm